Sadolin Quick Dry UV Protection Woodstain - Tinted Colour

Sadolin Quick Dry UV Protection Woodstain is a multipurpose water-based woodstain, which colours, enhances and protects interior and exterior wood. Offering outstanding 10-year protection, it’s the perfect combination of long-lasting durability and fast-drying convenience. With a quick-drying formula that’s touch dry in just 1 hour and ready for a second coat in 4 to 6 hours, it’s ideal for busy homeowners and professionals alike, allowing you to complete your project in just one day. Its advanced, highly flexible microporous formula allows the surface to breathe and adapt as the wood naturally expands and contracts with changing weather conditions. This flexibility helps maintain a long-lasting finish by resisting peeling, flaking and blistering over time.

• Semi-gloss finish
• 10 years protection
• Perfect for interior & exterior wood - excluding decking
• Quick dry & rainproof in 20 minutes
• UV Protection

Tinted Colour Information

Tinted paint is custom mixed in house at Next Day Paint using our Sadolin tinting machine. We mix the paint on site, which means we can offer our usual fast delivery with no extra delay. Tinted Colour Match paints can't be cancelled or returned as they are tinted to order.

Area	Interior & Exterior
Recommended Use	interior and exterior wood, excluding decking
Base	Water-Based
Coverage	Up to 13m2 per litre
Drying Time	Rainproof: around 20 minutes Touch Dry: 1 hour
Re-Coat Time	4-6 Hours
Recommended Coats	2 Coats
Application Method	Brush
VOC Levels	Low
Clean Up	Remove as much product as possible from the equipment before cleaning with water

Ensure the surface is sound, suitably dry, and free from anything that will interfere with the adhesion of the materials to be applied. Timber surfaces must be suitably prepared.

• The moisture content should not exceed 18% prior to coating.
• Resinous deposits should be removed.
• Degrease any exposed bare timber by wiping with a clean, lint free cloth dampened with methylated spirits, frequently changing the face of the cloth. Allow the solvent to fully evaporate.
• Abrade sound timber surfaces in the direction of the grain using medium/medium fine grade (P180/P240) pads/abrasive paper (nothing metallic), taking care not to damage or scratch across surfaces. Remove dust.
• “Knotting agents” should not be used with Sadolin systems.
• Use Sadolin Sadolin Wood fillers to make good any minor surface defects. General or all-purpose fillers are not suitable.
• We recommend the use of non-ferrous screws, nails, and fixings. Exposed ferrous items may corrode and break the coating film over time if not suitably primed/treated prior to decorating

New Timber:

• Timber exposed to the elements for longer than two weeks should be thoroughly sanded back to clean, bright timber.
• Organic growths should be treated with a suitable fungicidal solution and coat any non-treated wood with two liberal coats of Sadolin Quick Dry Wood Preserver paying particular attention to end grains. Allow 24 hours before overcoating.
• Where possible, the basecoat, Sadolin 10 Year Quick Dry UV Protection Woodstain, should be applied, all round, prior to fixing.

Previously Coated Timber:

• Remove all defective coatings.
• Grey denatured timber should be mechanically sanded back to clean, bright timber and treat as new.
• Organic growths should be treated with a suitable fungicidal solution and removed.
• Remaining sound surfaces should be cleaned with warm water and mild detergent, rinse thoroughly with clean water, and allow to dry.
• Lightly abrade in the direction of the grain, taking care not to break the surface coating. Remove dust.
• Lightly abrade in the direction of the grain, taking care not to break the surface coating. Remove dust. If a coloured base stain is required in order to match the existing factory applied coating, use Sadolin 10 Year Quick Dry UV Protection Woodstain in the most appropriate colour.

Colour guidance: The final colour and sheen of translucent coatings are dependent on timber species, colour, cut and presence of existing coating amongst other factors. We recommend a trial application in an inconspicuous area prior to commencement of work to check for colour accuracy. Always intermix (box) packs for colour consistency.

Always test a small area of the surface to be treated to ensure you are happy with the finished results

• Stir well before and during use. Use a good quality synthetic bristle brush.
• Apply in a full flowing coat, maintaining a wet edge. Ensure all surfaces, tops and bottoms of doors, end grains and undersides of Cills are coated. Avoid overspreading.

Note: Avoid applying in direct sun and onto warm or hot surfaces.

COATING SYSTEM:

Exterior Application:
• New Timber - 3 coats are required to achieve durability.
• Previously coated timber - patch stain with Sadolin 10 Year Quick Dry Woodstain, followed by 2 full coats of Sadolin 10 Year Quick Dry Woodstain.

Interior Application:
• New timber - 2-3 coats to achieve required depth of colour.
• Previously coated timber: patch stain with Sadolin 10 Year Quick Dry Woodstain followed by a full coat of Sadolin 10 Year Quick Dry Woodstain.
• On interior surfaces where extra durability is required e.g. Skirting boards and doors, we would recommend a further application of 2 coats of Sadolin Polyurethane Varnish.

Note: With certain substrates profiles and colours, it may be necessary to apply additional coats to achieve required colour.

Always follow manufacturer's instructions found on the tin

Maintenance requirement is indicated by lightening of colour, reduction in sheen or loss of water repellence. Between maintenance redecoration, surfaces may be washed with a warm water and liquid detergent solution to remove surface dirt, rinse with clean water, and allow to dry.

Store the product upright and secure, in secure dry conditions inaccessible to children or animals. Containers should be kept closed during storage. Do not store below 5ºC or above 40ºC.

Delivery - All orders placed on a working day before 3pm will be dispatched on the same day for next working day delivery. Orders placed before 3pm on Friday will be delivered on Monday (excluding bank holidays). Orders placed on weekends and Bank Holidays will be dispatched on the next working day. 

Delivery of Tinted Products - Tinted paints are dispatched in line with our express order process, shown below. However, due to their bespoke nature, please allow up to an additional 5 working days to accommodate any potential courier delays or delivery issues before receiving a refund or replacement.

We strongly suggest customers avoid booking tradespeople until they receive their order. Next Day Paint will not be held liable for any costs incurred due to order processing errors, delivery delays, or other issues that may result in financial loss.

Delivery Options

Express Shipping - £3.99

Order by: 3pm, Monday - Sunday

Expected delivery: Next working day, 8am - 9pm

Orders placed on weekends or bank holidays will be dispatched on the next working day for delivery on the following day

AM Delivery - £12.99

Order by: 2pm, Monday - Sunday

Expected delivery: Next working day by 2pm

Orders placed on weekends or bank holidays will be dispatched on the next working day for delivery on the following AM

Late Cut-Off - £5.99

Order by: 4pm, Monday - Friday 

Expected delivery: Next working day, 8am - 9pm

Orders placed on weekends or bank holidays will be dispatched on the next working day for delivery on the following day

Saturday Delivery - £9.95

Order by: 2pm, Friday 

Expected delivery: Saturday, 8am - 9pm

Standard Delivery (Out of Zone Postcodes Only) - £6.99

Order by: 3pm, Monday - Sunday 

Expected delivery:  3-5  working days, 8am - 9pm

Orders placed on weekends or bank holidays will be dispatched on the next working day for delivery on the following day

We do not deliver to the Channel Islands or the Republic of Ireland

Certain postcodes delivery times and charges may vary please head to the cart to see your available delivery options.

Returns

We offer a 14 day money back guarantee for all goods shipped correctly that are not required. If the item is not required, please send the item back for a full refund in its original condition, unused with its original packaging. Please note return for unwanted item is at your own expense.

Contact us as soon as possible to inform us you will be returning the product either by a contact form or by calling our team on 0161 960 0217.

All tinted paint purchases are final and non-refundable. If you're unsure about your selection, please refer to the product listing or contact us for guidance before ordering. Once mixed, tinted paints cannot be returned or refunded, regardless of delivery delays or changes in circumstances.

While we aim to meet delivery timelines, we are not responsible for delays caused by couriers, weather, or other external factors.

We recommend ordering samples or colour charts before purchasing. While we strive to represent colours accurately, screen settings and surface types can affect appearance. Opened tins cannot be returned due to dissatisfaction with colour.

For non-tinted products, we offer a 14-day money-back guarantee. Items must be returned unused, in original condition and packaging, at your own expense.

Damaged Paint

Please visit our damages page, where we can help resolve the issue for you. 

Incorrect Item

If we have sent you a different item from what you ordered, we will be happy to organise an exchange for the correct goods at no extra charge to yourself, please get in touch to organise this.

Faulty Items

Faulty items can be refunded or exchanged within 30 days. All returns are tested, and if no fault is found, no refund will be issued you'll have the option to have the item returned. For faults discovered after 30 days, please contact the manufacturer for further support.