Overview

Zinsser AllCoat Gloss is a solvent-based, gloss finish that is ideal for use on all exterior surfaces including wood, metal, masonry, plastic, stucco, brick, stone, cured concrete and cladding. It offers supreme protection and adhesion to all exterior surfaces and will form a vapour permeable, low maintenance, mould resistant coating. Zinsser AllCoat is also resistant to cracking, blistering and flaking for up to 15years before first maintenance on all suitably primed exterior surfaces.

• Up to 15 years protection

• Multi-surface application

• Mould resistant

• Excellent colour retention

Preparation

Always ensure the surface to be treated is clean, dry, sound, and free from any dust or possible contaminates that may interfere with adhesion.

• Remove any loose or peeling paint and sand edges of any remaining paint until smooth

Note: Special precautions should be taken during surface preparation of pre-1960 paint surface as they may contain harmful lead.

Application

Before applying we always recommend to test a small area of the surface to be treated to ensure you are happy with the finished results.

• Shake well before and during application

• Apply using a synthetic brush, roller or sprayer (For airless spraying, use a .017” tip and high-medium 2000-2500 PSI pressure)

• Only apply when temperatures are between 5°-32°C and avoid painting in direct sunlight

• Apply the first coat and allow to dry for approximatley 16 hours (paint will be touch dry in 4 hours) please note drying times will be extended in cooler temperatures

• Apply a second coat

• Allow to dry for 16 hours, paint will be fully cured in 7 days

• Normal application is 2 coats, however an additional coat should be applied to areas of high exposure such as sills and fascia boards

Note: Always follow the manufacturer's instructions found on the tin.