Overview

Zinsser AllCoat is a water-based, gloss finish that is ideal for use on all exterior surfaces including wood, metal, masonry, plastic, concrete, and cladding. It offers supreme protection and adhesion to all exterior surfaces, the paint forms a vapour-permeable, low maintenance, mould resistant coating. It's extremely fast to apply as it's recoatable in as little as an hour and can be used in an airless sprayer which makes it ideal for larger areas such as warehouses. Zinsser AllCoat Gloss is also resistant to cracking, blistering and flaking and will act as a primer and sealer.

• Self-priming and excellent adhesion

• Multi-surface application

• Mould resistant

• Resists cracking, flaking and peeling

Preparation

Always ensure the surface to be treated is clean, dry, sound, and free from any dust or possible contaminates that may interfere with adhesion.

• Remove any loose or peeling paint and sand edges of any remaining paint until smooth

Note: Special precautions should be taken during surface preparation of pre-1960 paint surface as they may contain harmful lead.

Application

Before applying we always recommend to test a small area of the surface to be treated to ensure you are happy with the finished results.

• Shake or stir well before application

• Apply using a synthetic bristle brush, roller or sprayer (for airless spraying, use a .017” tip and high-medium 2000-2500 PSI pressure)

• Ensure temperature is between 10° - 32°C

• Avoid working in direct sunlight

• Apply the first coat and allow to dry for 1 hour

• Apply a second coat, paint will fully cure in 7 days

• Normal application is 2 coats, however an additional coat should be applied to areas of high exposure such as sills and fascia boards.

Note: Always follow the manufacturer's instructions found on the tin.