Zinsser Bulls Eye 1-2-3

SKU: ZN7040001A1
Zinsser Bulls Eye 1-2-3
Zinsser Bulls Eye 1-2-3
Zinsser Bulls Eye 1-2-3
Zinsser Bulls Eye 1-2-3
Zinsser Bulls Eye 1-2-3
Zinsser Bulls Eye 1-2-3
Zinsser Bulls Eye 1-2-3
Zinsser Bulls Eye 1-2-3

Zinsser Bulls Eye 1-2-3

SKU: ZN7040001A1
Regular price £60.49
VAT included.
Only 68 items in stock!
  • Due to courier issues next day delivery cannot be guaranteed


Zinsser Bulls Eye 1-2-3 is a water-based primer and sealer formulated for use on interior and exterior surfaces. It can be used in multiple applications, firstly it fully blocks stains including graffiti, grease, spots, tar and asphalt. It primes surfaces and creates a bond coat for surfaces that are usually hard to stick to. It will also prevent rust formation when applied over clean ferrous metal such as iron and steel. Along with a multitude of applications Bulls Eye 123 offers low odour application, excellent adhesion and is quick drying. It's highly recommended for areas of high humidity such as bathrooms and laundry rooms.

• Adheres without sanding

• Low odour

• Quick Drying

• Mould and Mildew Resistant

Note: For oil and water stains, fire and smoke damage we recommend Bulls Eye 1-2-3 Plus

Area Interior & Exterior
Recommended Use Apply to interior and exterior – walls, ceilings, doors, trim, fascia, soffits, foundations, railings, and related paintable surfaces
Base Water-Based
Coverage Up to 10m2per litre
Drying Time 30 Minutes
Re-Coat Time 1 Hour
Recommended Coats 1-2 Coats


Always ensure the surface to be treated is clean, dry and free from any dust, algae, fungi or moss. Also ensure the product is free from excessive chalky material, grime, grease, oil, wax, mould or any contamination that may interfere with adhesion.

• Always wash the surface with a household cleaner, appropriate cleaning solution, or solvent. Clean new galvanised metal with methylated spirit

• Always ensure to remove loose or flaking material

• Sand any remaining paint to a smooth surface

• Sand exterior wood with a 80-100 grit sandpaper

• When sealing a stain always attempt to remove as much of the stain as possible prior to application

• New plaster should be sealed with Zinsser Gardz

• To remove mould, treat area with Zinsser Mould Killer & Remover

• Treat knots and sap streaks with Zinsser B-I-N Primer-Sealer


Before applying stir the product thoroughly and test a small area to ensure colour and adhesion.

• Zinsser Bulls Eye 123 is ready to use and does not require thinning

• Only apply when temperature range is between 10°– 32°C

• Apply one coat with a brush, roller or sprayer

• For best results prime the entire surface

• Allow to dry for a minimum of 1 hour

• Most surface will only require 1 coat however porous surfaces may require two coats to properly seal

• Surface will be fully cured in 7 days

Note: Always follow the manufacturer's instructions found on the tin.


All orders placed on a working day before 2pm will be dispatched on the same day for next working day delivery. Orders placed before 2pm on Friday will be delivered on Monday (excluding bank holidays). Orders placed on weekends and Bank Holidays will be dispatched on the next working day.

Delivery Charges 



Next Working Day




Certain postcodes delivery times and charges may vary please see our list below of effected postcodes. Please contact us prior to ordering, alternatively please ensure your number is on your order and we will contact you to discuss the best delivery method and charges.

AB37 - AB38

IV40 - IV56

PA42 - PA49

AB44 - AB45



AB53 - AB56

IV9 - IV12

PA61 - PA78

CA18 - CA27

KA27 - KA28

PA80 - PA88

HS1 - HS9

KW (All postcodes)

PH17 - PH26

Isle of Man (All IM postcodes)

LA15 - LA23

PH30 - PH44

IV14 - IV29


PH49 - PH50

IV30 - IV32

PA21 - PA38

TR21 - TR25



GY1 - GY10

ZE (All postcodes)

GY1 - GY10

JE1 - JE5

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.