Overview

Osmo Natural Oil Woodstain is a transparent, satin wood finish ideal for use on exterior wood including doors, windows, timber cladding, summer houses, pergolas and garden furniture. The formulation has been based on natural oils which allow the wood to breathe and reduces swelling and shrinking which means the finish will not crack, peel, flake or blister. It's also water-repellent and highly weatherproof and UV-stable to ensure maximum protection against the elements. Along with easy and seamless application and no sanding needed for maintenance coats, Osmo's Natural Oil Woodstain is a hassle free product for wood in outdoor areas.

• Fast drying

• Very water & dirt resistant

• Will not crack, peel or flake

• Natural wood grain remains visible

Preparation

Ensure the surface is clear from debris, dry and frost-free

• Clean old microporous stains thoroughly

• Old paints and lacquers must be completely removed by sanding or using a paint stripper such as Osmo's Paint Stripper

• If you have weathered or greying wood it may affect the finished colour we would advise using Osmo Wood Reviver Power Gel prior to application

• If additional protection against blue stain, rot and insects is desired, pre-treat the wood if possible on all sides with Osmo WR Base Coat.

• Using power washers will severely decrease the coverage of the finish

Application

Before applying the product test a small area on the surface to be treated to ensure you are happy with the finished results. Results are influenced by the condition of the wood therefore a trial application is highly recommended.

• Stir the product thoroughly

• Apply using a brush or roller, we recommend using Osmo's Flat Brush

• Apply b>thinly along the wood grain and spread well

• Allow to dry for 4-6 hours under good ventilation

• Apply a second coat as above

Note: Always follow the manufacturer's instructions found on the bottle.

Aftercare & Storage

Cleaning

Damp cleaning with Osmo Decking Cleaner using Osmo Decking Cleaning Brush. General or multi-purpose cleaners will increase the frequency of maintenance and recoating.

Occasional Maintenance

If necessary, intensive cleaning and refreshing using Osmo Wood Reviver Power Gel or Osmo Gard Cleaner.

Recoating

Simply re-apply one coat onto the clean and dry surface when signs of wear become visible. No sanding or priming necessary simply ensure the surface is clean and dry before application.