Zinsser AllCoat Exterior Satin (Solvent Based)

SKU: ZN7090001A1
Zinsser AllCoat Exterior Satin (Solvent Based)
Zinsser AllCoat Exterior Satin (Solvent Based)
Zinsser AllCoat Exterior Satin (Solvent Based)

Zinsser AllCoat Exterior Satin (Solvent Based)

SKU: ZN7090001A1
Regular price £76.30
/
VAT included.
Only 9 items in stock!
  • ORDER BEFORE 2PM FOR SAME DAY DISPATCH
  • Due to courier issues next day delivery cannot be guaranteed

Overview

Zinsser AllCoat is a solvent-based, 4-in-1 primer, sealer, stain blocker and finish that offers supreme protection to all exterior surfaces. It forms a vapour-permeable, low maintenance, weather resistant coat on wood, metal, masonry, plastic, concrete, and cladding. It’s formulated to be self priming and able to adhere to all surfaces including those coated with glossy paints and varnish. Zinsser AllCoat Exterior gives excellent resistance against cracking, blistering and flaking for up to 15 years before first maintenance.


• Protects against fungal degradation

• Excellent adhesion

• Resists cracking, blistering and flaking

• Offers excellent colour retention


Area Exterior
Recommended Use All Exterior surfaces including Building Cladding, girders, fencing, railings and masonry surfaces.
Base Solvent-Based
Coverage Up to 10m2per litre
Drying Time 1 Hour
Re-Coat Time 3 Hours
Recommended Coats 2-3 Coats
VOC Levels High

Preparation

Always ensure the surface to be treated is clean, dry and free from any dust, grease, oil, wax, mould or possible contaminates that may interfere with adhesion.


• Remove all existing mould and mildew before application with a fungicidal wash

• Timber at risk from decay or insect attack should be treated with a clear wood preserver

• Glossy or very hard surfaces should be abraded and degreased to enable adhesion

• Fill any holes or gouges with a suitable filler

• Spot prime knots and sap streaks with Zinsser B-I-N Primer-Sealer

• Abrade and degrease unweathered plastisol & powder coatings

• Always allow new plaster/cement & stucco to cure for 60-90 days before coating

• Thoroughly degrease new galvanised steel

<

Application

Before applying stir the product thoroughly and test a small area


• Stir paint thoroughly

• Only apply in temperatures between 5-32°C

• Apply paint in the direction of the wood grain using a brush, roller or airless sprayer

• Allow to dry for 3 hours before applying a second coat

• If being applied to areas of high exposure such as sills and fascia boards we would recommend 3 coats

• Paint will be fully cured in 7 days


Note: Always follow the manufacturer's instructions found on the tin.


Delivery

All orders placed on a working day before 2pm will be dispatched on the same day for next working day delivery. Orders placed before 2pm on Friday will be delivered on Monday (excluding bank holidays). Orders placed on weekends and Bank Holidays will be dispatched on the next working day.

Delivery Charges 

Express

 

Next Working Day

£3.95

 

Exceptions

Certain postcodes delivery times and charges may vary please see our list below of effected postcodes. Please contact us prior to ordering, alternatively please ensure your number is on your order and we will contact you to discuss the best delivery method and charges.

AB37 - AB38

IV40 - IV56

PA42 - PA49

AB44 - AB45

IV7

PA60

AB53 - AB56

IV9 - IV12

PA61 - PA78

CA18 - CA27

KA27 - KA28

PA80 - PA88

HS1 - HS9

KW (All postcodes)

PH17 - PH26

Isle of Man (All IM postcodes)

LA15 - LA23

PH30 - PH44

IV14 - IV29

PA20

PH49 - PH50

IV30 - IV32

PA21 - PA38

TR21 - TR25

IV36

PA41

GY1 - GY10

ZE (All postcodes)

GY1 - GY10

JE1 - JE5

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.