Sikkens Rubbol AZ Plus Paint

SKU: Sikkens5074218
Sikkens Rubbol AZ Plus Paint
Sikkens Rubbol AZ Plus Paint
Sikkens Rubbol AZ Plus Paint

Sikkens Rubbol AZ Plus Paint

SKU: Sikkens5074218
Regular price £20.29
VAT included.
Only 18 items in stock!
  • Due to courier issues next day delivery cannot be guaranteed


Sikkens Rubbol AZ Plus is a solvent based, high gloss finish for exterior and interior joinery and suitably primed metals and hard plastics. It protects joinery for upto 5 years and gives excellent opacity and colour retention, looking good for longer. Can be used as part of a system with Sikkens Rubbol Primer.

• High Gloss finish

• Highly extensible and flexible

• Excellent opacity giving even coverage

• Protects for up to 5 years

• One coat maintenance

Area Exterior
Recommended Use Exterior hardwood and softwood joinery as well as suitably metals and hard plastics
Base Solvent based
Coverage 16-18m2per litre
Drying Time 2-3 hours
Re-Coat Time 18 hours
Recommended Coats 2 coats
VOC Levels High


Always ensure the surface to be treated is clean, dry and free from any dust, algae, fungi or moss.

• Resinous deposits should be removed with a scraper

• Degrease the surface with a lint free cloth and suitable solvent, allow to evaporate fully before applying Sikkens

• For previously painted or worn wood use a fine sandpaper of 240 grit work in the direction of to abrade the surface the grain remove any loose paint

• Dust down entire surface

• Fill any cracks, holes or chips, always use a filler designed for timber


Before applying stir the product thoroughly and test a small area to ensure colour and adhesion. Colours can vary dependant on surface to be treated.

• Do not apply when there is the risk of rain or when temperatures are below 5°C or above 30°C

• Protect from frost and rain until dry

• Always ensure product is fully mixed before and during application to ensure consistency in colour and sheen

• Do not thin adding thinner will reduce opacity, a third coat may be required

• For best results use a good quality, long-haired, soft bristle brush

• The product should be applied in a full flowing coat, laying off in the direction of the grain, using the minimum number of brushstrokes necessary to produce an acceptable finish

• Avoid over brushing

• Apply 2 coats

• Allow 18 hours drying time between coats

• Second coat must be applied within 48 hours to provide full protection, if not applied within 48 hours light sanding with a medium grade abrasive, to provide a surface “key” will be required, ensure all dust is removed

• On new wood were possible the first coat should be applied all round prior to fixing

• Pay special attention to areas of exposed grain, tops and bottoms of doors and undersides of cills

Note: Always follow the manufacturer instructions found on the tin.

Aftercare & Storage

Store in cool, dry, frost-free conditions


All orders placed on a working day before 2pm will be dispatched on the same day for next working day delivery. Orders placed before 2pm on Friday will be delivered on Monday (excluding bank holidays). Orders placed on weekends and Bank Holidays will be dispatched on the next working day.

Delivery Charges 



Next Working Day




Certain postcodes delivery times and charges may vary please see our list below of effected postcodes. Please contact us prior to ordering, alternatively please ensure your number is on your order and we will contact you to discuss the best delivery method and charges.

AB37 - AB38

IV40 - IV56

PA42 - PA49

AB44 - AB45



AB53 - AB56

IV9 - IV12

PA61 - PA78

CA18 - CA27

KA27 - KA28

PA80 - PA88

HS1 - HS9

KW (All postcodes)

PH17 - PH26

Isle of Man (All IM postcodes)

LA15 - LA23

PH30 - PH44

IV14 - IV29


PH49 - PH50

IV30 - IV32

PA21 - PA38

TR21 - TR25



GY1 - GY10

ZE (All postcodes)

GY1 - GY10

JE1 - JE5

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.