Sadolin PV67 Heavy Duty Varnish

A two pack varnish ideal for high traffic areas that receive severe abrasion such as gyms, dance floors or hallways. This heavy duty, hard wearing finish can be applied to interior timber flooring and worktops. Formulated to provide protection against spills, scratches and scuffing.

• Satin or gloss finish
• Slip and scratch resistant
• Hardwearing

Always ensure the surface to be painted is clean, dry, and dirt free to ensure adhesion.

• Fill any minor defects, imperfections, or open joints with Sadolin Woodfiller.
• Only use non-ferrous screws, nails, and fixings.
• Resinous deposits should be removed

New timber

• Newly laid timber flooring must be allowed to settle and adjust to the temperature for several days.
• Remove any remaining residues on the surfaces to be decorated.
• Machine-sand where applicable to make the surface smooth and remove irregularities.
• Finish with a fine-grade abrasive paper and vacuum clean the surface thoroughly.
• Degrease the exposed bare timber surface by wiping with a clean, lint free cloth, moistened with methylated spirits.
• If the wood requires staining apply only one coat of Sadolin Classic, which is low build, and allow to dry for 3-5 days

Previously coated surfaces

• Remove coating by using chemical strippers or sanding.

We recommend always following the manufacturer's instructions found on the tin. Stir thoroughly, it is recommended that a small test area is applied before treating the entire surface to ensure compatibility.

• Apply with a soft bristle brush or short pile roller.
• When using a brush apply evenly and slowly to avoid the formation of air bubbles.
• When using a roller spread outwards from the point where the finish has been deposited. Then spread across at right angles to give an even build.
• Do not over-brush or roll.
• Allow the first coat to dry for 3-4 hours and lightly sand in the direction of the grain using a fine grade paper, P240 or finer.
• Remove dust and apply a second coat and third coat.

Q. Can I use bleach to clean my floors when I have applied Sadolin PV67 Heavy Duty Varnish?

A. It would not be advised to use bleach or strong chemicals to clean the surface as this will break down the varnish, it is advised to use warm water and mild detergent.

Q. Can I use a roller to apply the Sadolin PV67 Heavy Duty Varnish?

A. Yes, this can be applied with a brush or roller.

Q. When I apply my 2nd and 3rd coat why is Sadolin PV67 Heavy Duty Varnish not drying and starting to peel?

A. We advise to carefully follow the instructions sent with the Sadolin PV67 Heavy Duty Varnish. This product needs to be applied quickly. Once the 1st coat dries the floor needs to be lightly sanded back in the direction of the grain within 3-4 hours, then apply the 2nd & 3rd coat accordingly. If the 1st coat is left to fully cure the 2nd and 3rd coats will not adhere to the surface.

Delivery

All orders placed on a working day before 3pm will be dispatched on the same day for next working day delivery. Orders placed before 3pm on Friday will be delivered on Monday (excluding bank holidays). Orders placed on weekends and Bank Holidays will be dispatched on the next working day. All orders have a charge of £3.99 for express delivery.

Special Delivery

You can now choose some special delivery options. 

• AM Delivery: Get your order by 12pm
  If placed on a working day before 3pm, the AM Delivery will be dispatched on the same day for Next Working Day delivery. 
  Orders placed before 3pm on Friday will be delivered on Monday AM (excluding bank holidays). Orders placed on weekends and Bank Holidays will be dispatched on the next working day for delivery on the following AM. All orders have a charge of £12.99 for AM delivery.

• Late Cut-Off: Get an extra hour to place your order for Next Working Day delivery.
  Orders placed on a working day before 4pm will be dispatched on the same day for Next Working Day delivery. 
  Orders placed before 4pm on Friday will be delivered on Monday (excluding bank holidays). Orders placed on weekends and Bank Holidays will be dispatched on the next working day. All orders have a charge of £5.99 for Late Cut-Off delivery.

• Saturday Delivery: Get your order on Saturday
  Option available on Fridays. Orders placed on Friday before 3pm will be delivered on Saturday. All orders have a charge of £9.95 for Saturday delivery.

Exceptions

We do not deliver to the Channel Islands or the Republic of Ireland

Certain postcodes delivery times and charges may vary please head to the cart to see your available delivery options.

Returns

We offer a no quibble 14 day money back guarantee for all goods shipped correctly that are not required. If the item is not required, please send the item back for a full refund in its original condition, unused with its original packaging. 

Contact us as soon as possible to inform us you will be returning the product either by the contact form below or by calling our team on 0161 960 0217.

Please note any bespoke or mixed to order items can not be returned, if you are unsure this is your product please check the listing or contact us for details. 

We always recommend getting samples or contacting us for free of charge colourcharts. We do our best to represent colours as accurately as possible however screens variations and different surfaces can alter this. Unfortunately in the event you do not like the colour we are unable to accept the product back if they it has been opened.

Damaged Paint

Please visit our damages page where we can help resolve the issue for you. 

Incorrect Item

We will be happy to organise an exchange for the correct goods at no extra charge to yourself, please get in touch to organise this.

Faulty Items

If you find a fault with your product, we can offer a full refund or exchange within 30 days. We test every product that is returned to us, sadly if a product is found to have no fault we cannot refund this and the you will be given the option to have this returned to you. Please get in touch to discuss these options. If you find fault after 30 days of purchase you may wish to contact the manufacturer directly as they will be able to offer support with the product.