Overview

Ronseal Multi Purpose Wood Treatment is a solvent based clear wood treatment for all interior and exterior wood. This treatment deeply penetrates the wood to prevent woodworm, insect infestations and wet and dry rot giving you long lasting protection.

• Minimal VOC Levels

• Stops Woodworm and infestations

• Can be painted over with paint, stain, oil or varnish

• Prevents wet and dry rot

Preparation

Always ensure the surface to be treated is clean, dry and free from any dust, algae, fungi or moss.

• To clean wood give it a good brush with a stiff brush to remove any dirt, debris or loose wood

• If the wood has been previously stained, painted or varnished, we recommend you strip it back to the bare wood. For previously stained wood use a stain stripper

• If your wood has been effected by algae, fungi or moss this must be removed and can be cleaned with products such as Cuprinol Garden Furniture Cleaner

• If timbers have rotted and decayed, you will need to cut it out and replace it

Application

Before applying test a small area to ensure you are happy with colour and adhesion.

Use a brush or sprayer to apply the product

End grains should be dipped and don’t forget about joints too

Allow 24 hours for the first coat to dry

Apply a second coat

After 48 hours your wood will be ready for varnishing or painting

Note: Always follow the manufacturer instructions found on the tin.

Aftercare & Storage

Multi-Purpose Wood Treatment can be varnished, oiled or painted over. It will protect again all future infestations and put a stop to wet and dry rot.