Overview

Liberon Teak Oil with UV is a blend of pure quality tung oil and linseed oil, ideal for use on exterior and interior wood. It produces a hard-wearing, satin finish which nourishes, protects, and enhances the natural beauty of hard, exotic, and oily woods. This includes teak, rosewood, and iroko the added UV filters also make it ideal for use on garden furniture.

• Nourishes and enhances wood

• Added UV filters

• Ideal for hard and exotic woods

Preparation

Ensure the area to be treated is clean dry and free from dust.

• Ensure the wood surface is bare, remove any wax finishes with Liberon Wax and Polish Remover and any varnish finishes with Liberon Fine Wood Stripper.

Application

Before applying the product test a small area on the surface to be oiled to ensure you are happy with your results.

• Apply using a brush or lint-free cloth

• Apply in the direction of the wood grain

• Allow the oil to penetrate for up to 15 minutes

• Wipe off any excess with a clean lint free cloth (Failure to do so will prevent penetration of future coats and leave a sticky surface)

• Allow to dry for 24 hours

• Apply further coats as above the number of coats needed will depend on how dry or damaged the wood is

• Apply a minimum of three coats on exterior surfaces

• For best results, gently rub with Ultra Fine Steel Wool (Grade 0000) or extra fine abrasive paper between coats

• Allow to fully dry before use

Note: Always follow the manufacturer's instructions found on the tin.

Aftercare & Storage

Cleaning

Surfaces may be cleaned using a damp cloth and all spills must be wiped up immediately to ensure the longevity of the finish. Stubborn stains may be cleaned with a mild detergent.

Maintenance

Surfaces need to be re-oiled once a year or more, depending on usage. Exterior timber may require more maintenance, reapplying once or twice a year will help maintain protection.