Overview

Liberon Home ColourCare Decorative Floor Varnish is ideal for decorating and protecting wooden and laminate floors. A fantastic varnish that requires minimal preparation and is resistant to wear and tear making it ideal for high traffic areas and busy homes. The range of modern colours create a contemporary look on varnished and pre-varnished floors made from European or exotic woods or laminates.

• Hardwearing

• Ideal for wooden & laminate floors

• Resistant to stains

• No undercoat required

Preparation

Always ensure the surface to be varnished in clean and free from dust, grease, and debris.

• Any bare wooden floors must be sanded with a 120 grit sand paper

• Varnished, pre-varnished, or painted wooden floors if worn sand back to bare wood and remove all dust

• For varnished, pre varnished or painted wooden floors in good condition, wash, rinse and leave to dry. Sand lightly with 240 grit sand paper

• Waxed and oiled surfaces must be sanded until bare wood is reached

• Laminate flooring should be washed and left to dry. Sand lightly with a 240 grit sandpaper and remove dust

• Use a sugar soap cleaner to clean the surface of grease. Any grease or film can stop the paint from adhering properly

Application

Always stir the product and conduct a test patch to ensure you are happy with the finished results.

• Stir the varnish before and during to maintain a consistent colour throughout application, ensure to work around the bottom of the tin to mix thoroughly

• Apply using a soft-bristled brush or a 3-5mm short pile roller

• Apply in criss-cross strokes and spread evenly

• Finish in the direction of the grain

• Leave to dry for 3 hours

• Apply the second coat of varnish

• Leave to dry for 12 hours before using the area

• Always use the room with care for the first few days whilst the varnish fully cures, optimal resistance will be obtained after 2 weeks

Always follow the manufacturer's instructions found on the tin