Overview

Hammerite Direct to Rust Metal Paint is specially formulated to perform as primer, undercoat and topcoat in one. It’s a smooth gloss finish which will retain its sheen for years with excellent weather resistance. It’s durable, corrosion resistant decorative coating for ferrous and non-ferrous metals. Primer or undercoat are not necessary for sound surfaces.

• Smooth gloss finish

• Ultra tough

• Easy to use

• 8 year corrosion protection

• Excellent weather resistance

Preparation

Always ensure the surface to be treated is clean, dry and free from any dust, dirt, grease, flaking paint or rust.

• Sand/abrade smooth surfaces and remove any loose rust or flaking paint

• Remove dirt, dust and grease with a solution of diluted detergent

• Rinse with clean water and allow time to dry

• Available in different colours

Application

Before application test a patch onto the painted surfaces and leave for 1 hour. If there is no reaction continue to apply, if there is a reaction with the previous paint all paint must be removed before applying Hammerite Direct to Rust Metal Paint.

• For Bare Zinc, aluminium and galvanised surfaces firstly apply a href="https://next-day-paint.myshopify.com/products/hammerite-red-special-metal-primer" title="Hammerite Special Metals Primer">Hammerite Special Metals Primer

• Do not apply in temperatures below 8°C or above 25°C

• Lightly stir before use

• Do not thin

• On previously painted metal in a sound condition 1 coat should be sufficient

• On bare or rusty metals 2 coats may be required

• Ensure all edges and corners are adequately covered

• Do not over-over apply as sagging will occur

Note: Always follow the manufacturer instructions found on the tin.