Overview

Hammerite No.1 Rust Beater provides a high build finish to heavily pitted areas of rust and prevents new rust from forming. This easy to use rust beater not only kills rust but also primes and undercoats all in one. It can be used on fire surrounds, metal railings, metal gates and garage doors to name a few.

• Corrosion resistant

• Compatible with most topcoats

Preparation

Always ensure the surface to be treated is clean, dry and free from any dust, dirt, grease, flaking paint or rust.

• Remove all loose rust and paint with a wire brush

• Remove grease with Hammerite Brush Cleaner and Thinners and allow to dry

• Remove dirt and salt deposits with dilute detergent, rinse with fresh water and allow to dry

• Abrade clean steel with sandpaper to help adhesion

Application

Before applying test a small area to ensure adhesion.

• Do not apply in temperatures below 8°C or above 25°C

• Stir thoroughly before use

• Apply 2 coats

• Allow 6 hours between coats

• Top coat can be applied after 6 hours but for best results allow 24 hours

Note: Always follow the manufacturer instructions found on the tin.

Aftercare & Storage