Overview

Hammerite Direct to Rust Metal Paint in a hammered finish, comes in a handy aerosol can for easy application. It’s specially formulated to perform as a primer, undercoat and topcoat in one. This product can be applied directly to rust and dries quickly to a subtle hammered effect with a metallic sheen.

• Hammered effect with a metallic sheen

• Up to 8 years rust protection

• Ultra tough - excellent weather resistance

• Smooth glossy finish

Preparation

Always ensure the surface to be treated is clean, dry and free from any dust, dirt, grease, flaking paint or rust.

• Remove any loose paint and debris with a wire brush

• Remove dirt and dust with diluted detergent

• Remove grease with Hammerite Brush Cleaner & Thinners, then rinse with clean water and allow to dry

• On bare zinc, aluminium and galvanised surfaces, firstly apply Hammerite Special Metals Primer

Application

Before applying test a small area to ensure colour and adhesion.

• Spray a test patch of Hammerite Direct to Rust Metal Paint onto painted surfaces and leave for 1 hour

• If there is no reaction apply Hammerite Direct to Rust Metal Paint directly to surface

• If there is a reaction remove all paint before applying Hammerite Direct to Rust Metal Paint

• For best results store the aerosol at room temperature for two hours prior to use

• Shake can vigorously in a vertical motion, until the agitator ball is heard and continue to shake for a further 3 minutes

• Spray in light even strokes from a distance of 15cm to avoid runs

• Do not concentrate spray on one spot

• Apply at least 3-4 coats for maximum protection

• Allow 15 minutes between coats

• Between coats invert can and spray for 2 seconds to avoid blockages

• Touch dry 15 minutes, recoat after 15 minutes

Note: Always follow the manufacturer instructions found on the tin.

Aftercare & Storage