Farrow and Ball Wood Primer and Undercoat - Tinted Colour Match

Farrow & Ball Wood Primer & Undercoat is a water-based base coat for interior and exterior wood designed to be used under Estate Eggshell, Modern Eggshell, Exterior Eggshell, Full Gloss or Dead Flat. This protective base can be used on bare and previously painted wood such as floorboards and knots. Available in four shades to match your chosen topcoat colour and crafted with high-quality ingredients, each one has been carefully formulated to add richness and depth and deliver that signature Farrow & Ball look with a long-lasting finish once your topcoat is applied. Using Farrow & Ball Wood Primer & Undercoat will also ensure your topcoat adheres effortlessly to the surface you are painting while providing a durable, even finish.

• Apply before using Estate Eggshell, Modern Eggshell, Exterior Eggshell, Full Gloss or Dead Flat
• Prepares the surface for topcoat
• Quick drying
• Low odour & Low VOC

Tinted Colour Information

Tinted paint is custom mixed in house at Next Day Paint using our Farrow & Ball tinting machine. We mix the paint on site, which means we can offer our usual fast delivery with no extra delay. Tinted Colour Match paints can't be cancelled or returned as they are tinted to order.

Area	Interior & Exterior
Recommended Use	Can be used on wood before using Farrow & Ball Estate Eggshell, Modern Eggshell, Exterior Eggshell, Full Gloss or Dead Flat. Not suitable for exterior decking or other pressure treated wood.
Base	Water-Based
Coverage	Up to 13m2 per litre
Drying Time	2 hours
Re-Coat Time	4 hours
Recommended Coats	1 Coat
Application Method	Brush, Roller or Sprayer
VOC Levels	Minimal
Clean Up	Remove as much product as possible from the equipment before cleaning with water

Ensure all surfaces are sound, clean, dry and free from dirt, grease and other contamination.

For most surfaces it is recommended to use a dilute Sugar Soap solution following the manufacturer's instructions. We do not recommend using solvent-based cleaning products or strong alkaline solutions as these can impact adhesion.

After cleaning, wipe the surface with a damp cloth and allow to dry.

When opening a new tin of paint, don't allow any dust or debris to fall from the lid into the continents. If you are reusing a tin of paint, it is recommended to strain it.

Knotty or Resinous Wood Preparation:

• Heat the knot to draw out any excess resin (we recommend using a hot air paint stripper).
• Scrape off any residue resin, and then thoroughly clean the area with white or methylated spirit. Allow the area to dry thoroughly before continuing.

New and Unpainted Interior Wood (Not Floors) Preparation:

• Fill any cracks, holes and open joints with an appropriate filler.
• To improve the paint's adhesion, lightly sand the surface.
• Prepare any filled, knotty or resinous areas as above and patch prime with Farrow & Ball Wood Primer & Undercoat
• Apply one coat of Farrow & Ball Wood Primer & Undercoat in the correct colour tone for your top coat. Allow a minimum of 4 hours drying time between coats.
• Apply two coats of your chosen Farrow & Ball finish, allowing the correct drying time between coats.

Previously Painted Interior Wood (Not Floors) Preparation:

• Remove any areas of old paint which are peeling or blistering as flaking or peeling can occur if you paint over weak paint layers. Blend and 'feather' the edges of areas of old paint, as this helps to smooth out the surface.
• Fill any cracks, holes and open joints with an appropriate filler.
• Lightly sand the surface to improve paint adhesion.
• Patch prime any filled or bare knotty / resinous areas with Farrow & Ball Wood Primer & Undercoat.
• Apply one coat of Farrow & Ball Wood Primer & Undercoat, in the correct colour tone for your top coat (and allowing a minimum of 4 hours drying time between coats).
• Then apply two coats of your chosen Farrow & Ball finish, allowing the correct drying time between coats.

Exterior Bare Wood Surface Preparation:

• Fill any cracks, holes and open joints with an appropriate filler.
• To improve the paint's adhesion, lightly sand the surface.
• In environments where wood rotting fungi is likely to occur, treat with exterior wood preservative prior to priming.
• Prepare any knotty or resinous areas as above and patch prime with Farrow & Ball Wood Primer & Undercoat.
• Apply one coat of Farrow & Ball Wood Primer & Undercoat, in the correct colour tone for your top coat, and allow a minimum of 4 hours drying time.
• Apply two coats of your chosen Farrow & Ball finish, allowing the correct drying time between coats.

Please note: Not suitable for exterior decking or other pressure treated wood.

Exterior Previously Painted Wood Surface Preparation:

• Remove any areas of old paint which are peeling or blistering as flaking or peeling can occur if you paint over weak paint layers. Blend and 'feather' the edges of areas of old paint, as this helps to smooth out the surface.
• Fill any cracks, holes and open joints with a water-based exterior wood filler.
• Lightly sand the surface to improve paint adhesion.
• In environments where wood rotting fungi is likely to occur, treat with exterior wood preservative prior to priming.
• Prepare any knotty or resinous areas as above and patch prime with Farrow & Ball Wood Primer & Undercoat.
• Apply one coat of Farrow & Ball Wood Primer & Undercoat, in the correct colour tone for your top coat (and allowing a minimum of 4 hours drying time between coats).
• Then apply two coats of your chosen Farrow & Ball finish, allowing the correct drying time between coats.

Please note: Repeatedly repairing cracks, holes and open joints in a surface may indicate that the surface is nearing the end of its life and will require additional effort to maintain it. If this is the case consider renewal or replacement.

Find out more information about the preparation of various surfaces on the "Product Advice Sheet" in the "Datasheet" section.

Always test a small area of the surface to be painted to ensure compatibility

Don't over dilute the Primer & Undercoat or mist coat. This will reduce their opacity, causing an uneven finish and incomplete colour development. Before applying the top coat, consider if a second, undiluted coat of Primer & Undercoat is needed to achieve full opacity.

• Stir thoroughly before use.
• Ensure all surfaces are sound, clean, dry and free from dirt, grease and other contamination. Please note that flaking or peeling may occur if you paint over weak paint layers - to avoid this sand back any previous weak paint layers before you start painting.
• For most applications, a quality fine-tipped synthetic bristled paint brush or medium pile woven polyester roller is recommended.

Find out more information about the Application on the "Product Advice Sheet" in the "Datasheet" section.

Always follow manufacturer's instructions found on the tin

For the very best results, Farrow & Ball always recommend using a Farrow & Ball Primer & Undercoat.

Recommended Primer & Undercoats:

• For use on wood: Farrow & Ball Wood Primer & Undercoat
• For use on metal: Farrow & Ball Metal Primer & Undercoat
• For use on interior walls & ceilings: Farrow & Ball Wall & Ceiling Primer & Undercoat
• For use to patch prime unsound masonry surfaces : Farrow & Ball Masonry & Plaster Stabilising Primer

Protect from frost and extreme temperatures.

It is recommended to use this product within 6 months of purchase therefore, we are unable to accept responsibility for the deterioration of contents or packaging after this date.

Find out more information on the "Product Advice Sheet" in the "Datasheet" section.

Download Datasheet

Delivery

All orders placed on a working day before 3pm will be dispatched on the same day for next working day delivery. Orders placed before 3pm on Friday will be delivered on Monday (excluding bank holidays). Orders placed on weekends and Bank Holidays will be dispatched on the next working day. All orders have a charge of £3.99 for express delivery.

Special Delivery

You can now choose some special delivery options. 

• AM Delivery: Get your order by 12pm
  If placed on a working day before 3pm, the AM Delivery will be dispatched on the same day for Next Working Day delivery. 
  Orders placed before 3pm on Friday will be delivered on Monday AM (excluding bank holidays). Orders placed on weekends and Bank Holidays will be dispatched on the next working day for delivery on the following AM. All orders have a charge of £12.99 for AM delivery.

• Late Cut-Off: Get an extra hour to place your order for Next Working Day delivery.
  Orders placed on a working day before 4pm will be dispatched on the same day for Next Working Day delivery. 
  Orders placed before 4pm on Friday will be delivered on Monday (excluding bank holidays). Orders placed on weekends and Bank Holidays will be dispatched on the next working day. All orders have a charge of £5.99 for Late Cut-Off delivery.

• Saturday Delivery: Get your order on Saturday
  Option available on Fridays. Orders placed on Friday before 3pm will be delivered on Saturday. All orders have a charge of £9.95 for Saturday delivery.

Exceptions

We do not deliver to the Channel Islands or the Republic of Ireland

Certain postcodes delivery times and charges may vary please head to the cart to see your available delivery options.

Returns

We offer a 14 day money back guarantee for all goods shipped correctly that are not required. If the item is not required, please send the item back for a full refund in its original condition, unused with its original packaging. Please note return for unwanted item is at your own expense.

Contact us as soon as possible to inform us you will be returning the product either by the contact form below or by calling our team on 0161 960 0217.

Please note any bespoke or mixed to order items can not be returned, if you are unsure this is your product please check the listing or contact us for details. 

We always recommend getting samples or contacting us for free of charge colourcharts. We do our best to represent colours as accurately as possible however screens variations and different surfaces can alter this. Unfortunately in the event you do not like the colour we are unable to accept the product back if they it has been opened.

Damaged Paint

Please visit our damages page where we can help resolve the issue for you. 

Incorrect Item

We will be happy to organise an exchange for the correct goods at no extra charge to yourself, please get in touch to organise this.

Faulty Items

If you find a fault with your product, we can offer a full refund or exchange within 30 days. We test every product that is returned to us, sadly if a product is found to have no fault we cannot refund this and the you will be given the option to have this returned to you. Please get in touch to discuss these options. If you find fault after 30 days of purchase you may wish to contact the manufacturer directly as they will be able to offer support with the product.