Polyvine Heavy Duty Floor Varnish - Satin

SKU: VHD5
Polyvine Heavy Duty Floor Varnish - Satin
Polyvine Heavy Duty Floor Varnish - Satin
Polyvine Heavy Duty Floor Varnish - Satin
Polyvine Heavy Duty Floor Varnish - Satin
Polyvine Heavy Duty Floor Varnish - Satin

Polyvine Heavy Duty Floor Varnish - Satin

SKU: VHD5
Regular price £30.14
/
VAT included.
Only 6 items in stock!
  • ORDER BEFORE 2PM FOR SAME DAY DISPATCH
  • Due to courier issues next day delivery cannot be guaranteed

Overview

Polyvine Heavy Duty Floor Varnish is an ultra hard, high quality, water-based polyurethane that dries to a crystal clear film. Formulated for use on interior floors including wood, stone, brick, quarry, tiles, slate and cork. It offers a high level of protection and is ideal for areas of high traffic as it will withstand heavy foot traffic in such areas as gymnasiums, dance floors and public halls. It offers water, stain, heat, chemical and abrasion resistance and cures in as little as 16 hours so is ideal for application in busy environments.

  • Food & child safe
  • Extremely hard wearing
  • Fast drying
  • Available in a Dead Flat finish

  • Area Interior
    Recommended Use Wood, stone, brick, quarry, tiles, slate and cork.
    Base Water-based
    Coverage Upto 10-20sqm2 per litre
    Drying Time 30-60 Minutes Touch Dry, 16 Hours Cure Time
    Re-Coat Time 1-2 Hours
    Recommended Coats 3 Coats

    Preparation

    Ensure the surface is clean and free from grease, wax and polish.

  • Use sugar soap to clean the surface, rinse well with water and allow to dry
  • Wooden floors should be sanded with an industrial sander
  • Newly painted wood should be lightly sanded to provide a key
  • Old, unsound finishes should be completely removed using a suitable chemical stripper
  • A stain sealer may be required on emulsion/latex paint finishes to ensure stains will not be visible

  • Application

    Always try the varnish on a test patch before embarking on the project to ensure you are happy with the finished results.

  • Apply using a brush, roller or sprayer
  • Porous surfaces should be primed with Heavy Duty Floor Varnish diluted 10% with water
  • If possible apply in the direction of the wood grain
  • Allow to dry for 2 hours between coats
  • Wooden floors may require sanding between coats with a fine sand paper, if there is any raising of the grain
  • Apply 3 coats
  • Allow 16 hours after the final coat before full use

  • Tip: For a high level of protection and stain resistance apply 2 coats of satin, then 1 coat of dead flat.


    Always follow the manufacturer's instructions found on the container


    Aftercare & Storage

    Protect from extremes of temperature during storage and application. Do not use below 5°C.

    Delivery

    All orders placed on a working day before 2pm will be dispatched on the same day for next working day delivery. Orders placed before 2pm on Friday will be delivered on Monday (excluding bank holidays). Orders placed on weekends and Bank Holidays will be dispatched on the next working day.

    Delivery Charges 

    Express

     

    Next Working Day

    £3.95

     

    Exceptions

    Certain postcodes delivery times and charges may vary please see our list below of effected postcodes. Please contact us prior to ordering, alternatively please ensure your number is on your order and we will contact you to discuss the best delivery method and charges.

    AB37 - AB38

    IV40 - IV56

    PA42 - PA49

    AB44 - AB45

    IV7

    PA60

    AB53 - AB56

    IV9 - IV12

    PA61 - PA78

    CA18 - CA27

    KA27 - KA28

    PA80 - PA88

    HS1 - HS9

    KW (All postcodes)

    PH17 - PH26

    Isle of Man (All IM postcodes)

    LA15 - LA23

    PH30 - PH44

    IV14 - IV29

    PA20

    PH49 - PH50

    IV30 - IV32

    PA21 - PA38

    TR21 - TR25

    IV36

    PA41

    GY1 - GY10

    ZE (All postcodes)

    GY1 - GY10

    JE1 - JE5

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.