{"product_id":"rust-oleum-7300-combicolor-sparkling-aluminium-tinted-colour","title":"Rust-Oleum 7300 CombiColor Sparkling Aluminium - Tinted Colour","description":"\u003ch1\u003eOverview\u003c\/h1\u003e \u003cp\u003eGive metal surfaces a durable, professional metallic finish with Rust-Oleum CombiColor 7300 Sparkling Aluminium – Tinted Colour. This solvent-based metal coating combines primer and topcoat in one, providing an efficient solution for protecting and enhancing suitably prepared metal surfaces.\u003c\/p\u003e\n\u003cp\u003eBased on a urethane-modified alkyd formulation, CombiColor 7300 offers good drying performance, including at lower temperatures. Its rust-inhibitive pigments provide corrosion protection for metal in light industrial environments, while the lead- and chromate-free formulation makes it a practical choice for a wide range of maintenance and refurbishment projects.\u003c\/p\u003e \u003cp\u003eThe Sparkling Aluminium metallic finish delivers an attractive aluminium-effect appearance, making it ideal where both protection and a decorative metallic finish are required. The coating can be applied by brush, roller or air-atomised spray, with spray application recommended where a more uniform metallic appearance is important.\u003c\/p\u003e\n\u003cp\u003eFor use on bare, manually derusted or suitably primed steel, Rust-Oleum CombiColor 7300 can also be used as part of a more comprehensive coating system. Galvanised, zinc and aluminium surfaces should first be treated with Rust-Oleum CombiColor Adhesion Primer 3302. For more aggressive industrial environments, Rust-Oleum recommends using CombiPrimer Anti-Corrosion 3369\/3380 before applying the topcoat.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePrimer and topcoat in one\u003c\/li\u003e\n\u003cli\u003eMetallic Sparkling Aluminium finish\u003c\/li\u003e\n\u003cli\u003eTinted colour match available\u003c\/li\u003e\n\u003cli\u003eSuitable for steel and suitably prepared metal surfaces\u003c\/li\u003e\n\u003cli\u003eRust-inhibitive pigments for corrosion protection\u003c\/li\u003e\n\u003cli\u003eSuitable for light industrial environments\u003c\/li\u003e\n\u003cli\u003eHeat resistance up to 90°C dry heat; discolouration may occur at elevated temperatures\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePlease note: Metallic coatings can show variations in appearance depending on application method and surface conditions. For the most homogeneous appearance with aluminium-coloured coatings, spray application is recommended.\u003c\/p\u003e \u003ch3\u003eTinted Colour Information\u003c\/h3\u003e Tinted paint is custom mixed in house at Next Day Paint using our Rust-Oleum tinting machine. We mix the paint on site, which means we can offer our usual fast delivery with no extra delay. Tinted Colour Match paints can't be cancelled or returned as they are tinted to order. \u003ctable\u003e\n\u003ctd\u003eArea\u003c\/td\u003e\n\u003ctd\u003eInterior \u0026amp; Exterior\u003c\/td\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended Use\u003c\/td\u003e\n\u003ctd\u003eDesigned for application on bare, manually derusted, or primed steel.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003ctd\u003eSolvent Based\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoverage\u003c\/td\u003e\n\u003ctd\u003eUp to 10.3m² per litre\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrying Time\u003c\/td\u003e\n\u003ctd\u003e\u003cul\u003e\n\u003cli\u003eTouch dry - 1.5-3 hours\u003c\/li\u003e\n\u003cli\u003eDry to handle - 6-16 hours\u003c\/li\u003e\n\u003cli\u003eFully cured - 5-14 days\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRe-Coat Time\u003c\/td\u003e\n\u003ctd\u003e8-16 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication Method\u003c\/td\u003e\n\u003ctd\u003eBrush, Roller or Sprayer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVOC Levels\u003c\/td\u003e\n\u003ctd\u003eHigh\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClean Up\u003c\/td\u003e\n\u003ctd\u003eUse RUST-OLEUM Thinner 7301 or RUST-OLEUM Thinner 160\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePreparation\u003c\/h2\u003e\u003cp\u003eProper surface preparation is essential for achieving good adhesion, corrosion protection and a high-quality metallic finish.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eClean the surface thoroughly. Remove oil, grease, dirt and other contaminants using an appropriate alkaline or high-pressure\/steam cleaning method with a suitable detergent.\u003c\/li\u003e\n\u003cli\u003eRemove loose material. Eliminate rust scale, loose mill scale, loose rust and poorly adhered existing coatings by scraping, wire brushing to St 3 (ISO 8501-1), light abrasive blasting or sanding.\u003c\/li\u003e\n\u003cli\u003ePrepare existing sound coatings. Sand intact coatings to lightly roughen the surface and provide a suitable key for the new coating.\u003c\/li\u003e\n\u003cli\u003eGalvanised, zinc and aluminium surfaces: Apply Rust-Oleum CombiColor Adhesion Primer 3302 before applying CombiColor 7300.\u003c\/li\u003e\n\u003cli\u003eFor steel in more aggressive industrial environments, use Rust-Oleum CombiPrimer Anti-Corrosion 3369\/3380 as the primer system where appropriate.\u003c\/li\u003e\n\u003cli\u003eEnsure the surface is clean and completely dry before application.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplication\u003c\/h2\u003e\u003cp\u003eAir, substrate and coating temperature should be between 5°C and 35°C. Relative humidity should be below 85%. The substrate temperature must be at least 3°C above the dew point. Stir the coating thoroughly before use to ensure a consistent finish and homogeneous colour.\u003c\/p\u003e\n\u003ch3\u003eBrush Application\u003c\/h3\u003e\n\u003cp\u003eFor brush application, use a natural-bristle, long-hair brush.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThin with up to 10% Rust-Oleum Thinner 7301 by volume, where required.\u003c\/li\u003e\n\u003cli\u003eApply evenly while avoiding excessive brushing.\u003c\/li\u003e\n\u003cli\u003eAllow sufficient drying time between coats.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRoller Application\u003c\/h3\u003e\n\u003cp\u003eUse a short-nap polyamide roller, approximately 6–12 mm.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThin with up to 10% Rust-Oleum Thinner 7301 by volume, if required.\u003c\/li\u003e\n\u003cli\u003eRoller application may require two coats to achieve the recommended dry film thickness.\u003c\/li\u003e\n\u003cli\u003eWork methodically to maintain an even appearance, particularly with the metallic finish.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAir-Atomised Spray Application\u003c\/h3\u003e\n\u003cp\u003eFor the most uniform appearance on Sparkling Aluminium and other aluminium-coloured metallic coatings, spray application is recommended.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThin with 10–25% Rust-Oleum Thinner 7301 by volume.\u003c\/li\u003e\n\u003cli\u003eTip size: 1.0–1.5 mm\u003c\/li\u003e\n\u003cli\u003eAtomising pressure: 2–4 bar\u003c\/li\u003e\n\u003cli\u003eSuitable for gravity-cup and pressure-cup spray equipment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor an especially homogeneous aluminium-coloured finish, Rust-Oleum recommends applying 7311 with HVLP.\u003c\/p\u003e\n\u003cp\u003eTouch dry: approximately 2 hours, dry to handle: approximately 8 hours, dry to recoat: approximately 16 hours, fully cured: approximately 7 days. Lower temperatures increase drying times. At 10°C, touch dry is approximately 3 hours, dry to handle 16 hours, dry to recoat 24 hours and fully cured in approximately 14 days.\n\u003c\/p\u003e\n\u003cp\u003eAt 30°C, touch dry is approximately 1½ hours, dry to handle 6 hours, dry to recoat 8 hours and fully cured in approximately 5 days.\u003c\/p\u003e\u003ch2\u003eAftercare \u0026amp; Storage\u003c\/h2\u003e\u003cp\u003eAllow the coating to fully cure before subjecting the surface to heavy use, cleaning or demanding service conditions. Full curing is approximately 7 days at 20°C, although this will vary with temperature and environmental conditions.\u003c\/p\u003e\u003cp\u003e\n\u003c\/p\u003e\u003cp\u003eOnce cured:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eClean coated surfaces using suitable, non-aggressive cleaning methods.\u003c\/li\u003e\n\u003cli\u003eAvoid harsh abrasion that could damage the metallic finish.\u003c\/li\u003e\n\u003cli\u003eInspect the coating periodically for signs of mechanical damage, wear, corrosion or coating breakdown.\u003c\/li\u003e\n\u003cli\u003eRepair damaged areas promptly by cleaning and preparing the affected area before recoating.\u003c\/li\u003e\n\u003cli\u003eAvoid exposing the coating to temperatures above its recommended heat resistance. The coating is rated to approximately 90°C dry heat, and discolouration may occur at elevated temperatures.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBecause metallic finishes can be visually sensitive to application technique, repairs should be blended carefully where possible to minimise differences in appearance.\u003c\/p\u003e\n\u003ch3\u003eStorage\u003c\/h3\u003e\n\u003cp\u003eStore Rust-Oleum CombiColor 7300 in its original, unopened container in a dry, well-ventilated area, away from direct sunlight.\u003c\/p\u003e\n\u003cp\u003eRecommended storage conditions:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTemperature: 5°C to 35°C\u003c\/li\u003e\n\u003cli\u003eKeep containers securely closed when not in use.\u003c\/li\u003e\n\u003cli\u003eProtect from excessive heat and direct sunlight.\u003c\/li\u003e\n\u003cli\u003eKeep away from ignition sources and follow the relevant safety information supplied with the product.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWhen stored correctly, the product has a minimum shelf life of 5 years from the date of production in unopened cans.\u003c\/p\u003e\n\u003cp\u003eAlways consult the product Safety Data Sheet (SDS) and safety information on the container before use.\u003c\/p\u003e","brand":"Rust-Oleum","offers":[{"title":"1 Litre","offer_id":58747615707520,"sku":"TCCCSA1L","price":31.81,"currency_code":"GBP","in_stock":true},{"title":"2.5 Litre","offer_id":58747615740288,"sku":"TCCCSA25L","price":58.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0418\/6229\/9814\/files\/ndp-rust-oleum-combicolor-sparkling-aluminium-tinted-colour-match-all-sizes.jpg?v=1789101432","url":"https:\/\/nextdaypaint.co.uk\/products\/rust-oleum-7300-combicolor-sparkling-aluminium-tinted-colour","provider":"Next Day Paint","version":"1.0","type":"link"}