{"product_id":"hb42-ultimate-grab-adhesive-white-290ml","title":"HB42 Ultimate Grab Adhesive - White - 290ml","description":"\u003ch1\u003eOverview\u003c\/h1\u003e \u003cp\u003eHB42 Ultimate Super Grab Adhesive is a trade strength adhesive built on instant grab technology, giving bond strength almost double that of standard grab adhesives. It bonds even in wet conditions, adheres to an exceptionally wide range of surfaces, and is designed as a complete fixing solution that eliminates the need for secondary support in most applications.\u003c\/p\u003e\n\u003cp\u003eFrom large panels and wallboards to windowsills, dado rails, brick slips, cladding and sanitary fixtures, HB42 Super Grab handles heavy-duty fixing jobs both internally and externally. It bonds to glass, wood, enamel, painted surfaces, plasterboard, coated metals, Perspex, concrete, plastics, polycarbonates, PVCu, zinc, stainless steel, copper, lead, anodised aluminium, and epoxy or polyester panels.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInstant Grab Technology - near-double the bond strength of standard grab adhesives\u003c\/li\u003e\n\u003cli\u003eBonds in the wet - performs even underwater\u003c\/li\u003e \u003cli\u003eBonds heavy items - a genuine alternative to mechanical fixings\u003c\/li\u003e\n\u003cli\u003eHigh elasticity - stretches up to 300% without failure\u003c\/li\u003e\n\u003cli\u003eNo shrinking - maintains bond line integrity over time\u003c\/li\u003e\n\u003cli\u003eSolvent free \u0026amp; low VOC - EC1 Plus rated, GEV approved, odourless\u003c\/li\u003e\n\u003cli\u003eWeatherproof - suitable for internal and external use\u003c\/li\u003e\n\u003cli\u003eWide substrate compatibility - bonds to almost anything, including lead\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLimitations: Not recommended for use on PE, PP, Teflon, wax, neoprene or bituminous surfaces. Not suitable as a joint sealant. An adhesion test is recommended prior to full application. Contains N-(3-(trimethoxysilyl)propyl)ethylenediamine and related substances, which may cause an allergic reaction - refer to the safety data sheet before use.\u003c\/p\u003e \u003ctable\u003e\n\u003ctd\u003eArea\u003c\/td\u003e\n\u003ctd\u003eInterior \u0026amp; exterior\u003c\/td\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended Use\u003c\/td\u003e\n\u003ctd\u003e\u003cul\u003e\n\u003cli\u003eFixing large panels and wallboards\u003c\/li\u003e\n\u003cli\u003eBonding brick slips, cladding and sanitary fixtures\u003c\/li\u003e\n\u003cli\u003eFixing dado rails, windowsills, mouldings and thresholds\u003c\/li\u003e\n\u003cli\u003eGeneral trade fixing where secondary mechanical support is impractical\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003ctd\u003eSolvent Free\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrying Time\u003c\/td\u003e\n\u003ctd\u003eSkin Formation Time (23°C \/ 55% RH)\t10–15 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication Method\u003c\/td\u003e\n\u003ctd\u003eCartridge gun\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVOC Levels\u003c\/td\u003e\n\u003ctd\u003eLow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePreparation\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnsure all surfaces are clean, dry and free from dust, grease and loose material.\u003c\/li\u003e\n\u003cli\u003eCarry out an adhesion test on the intended substrate before full application, especially on unfamiliar or coated materials.\u003c\/li\u003e\n\u003cli\u003eCut the cartridge seal and screw on the pre-cut 'V' nozzle - this controls the correct depth of adhesive extruded.\u003c\/li\u003e\n\u003cli\u003eLoad the cartridge into a skeleton gun for application.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplication\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eApply HB42 Super Grab Adhesive to one surface only, in vertical strips approximately 30cm apart.\u003c\/li\u003e\n\u003cli\u003eImmediately place the item into position and apply even pressure across the surface to achieve good initial grab.\u003c\/li\u003e\n\u003cli\u003eFor heavy items, use temporary support while the adhesive cures.\u003c\/li\u003e\n\u003cli\u003eFor overhead applications, always use a mechanical fixing in addition to the adhesive.\u003c\/li\u003e\n\u003cli\u003eApply at room temperature for optimum flow when using a skeleton gun.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTip: Working within the +5°C to +40°C application range gives the best flow and initial grab performance.\u003c\/p\u003e\u003ch2\u003eAftercare \u0026amp; Storage\u003c\/h2\u003e\u003ch3\u003eAftercare \u0026amp; Curing\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eKeep fixed items supported (temporary support or mechanical fixings where recommended) until the adhesive has fully cured.\u003c\/li\u003e\n\u003cli\u003eSkin formation begins in around 10–15 minutes at 23°C \/ 55% RH, but full cure takes longer depending on bond line thickness and conditions.\u003c\/li\u003e\n\u003cli\u003eOnce cured, the bond is weatherproof and water resistant, suitable for both internal and external use.\u003c\/li\u003e\n\u003cli\u003eAvoid disturbing or loading the fixed item until initial grab and cure are established.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eClean Up\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWipe away excess uncured adhesive immediately using a dry cloth or paper towel.\u003c\/li\u003e\n\u003cli\u003eUncured residue on tools and non-porous surfaces can be removed with a suitable solvent cleaner.\u003c\/li\u003e\n\u003cli\u003eOnce cured, the adhesive is solvent-resistant and can only be removed mechanically (e.g. scraping or sanding).\u003c\/li\u003e\n\u003cli\u003eReseal or replace the nozzle after use to prevent the cartridge curing in storage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eStorage\u003c\/h3\u003e\n\u003cp\u003eStore cartridges in cool, dry conditions between +5°C and +25°C. Under these conditions, shelf life is 12 months. Frost resistant down to -15°C during transport.\u003c\/p\u003e","brand":"HB42","offers":[{"title":"Default Title","offer_id":58424980767104,"sku":"HB42GRAB","price":10.75,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0418\/6229\/9814\/files\/ndp-hb42-ultimate-grab-adhesive-white-290ml.jpg?v=1783702804","url":"https:\/\/nextdaypaint.co.uk\/products\/hb42-ultimate-grab-adhesive-white-290ml","provider":"Next Day Paint","version":"1.0","type":"link"}