{"product_id":"bradite-roadline-rl52-water-based-paint-5-litre","title":"Bradite Roadline RL52 Water Based Paint - 5 Litre","description":"\u003ch1\u003eOverview\u003c\/h1\u003e \u003cp\u003eBradite Roadline RL52 is a quick-drying, high-performance, ambient crosslinking water-based acrylic line marking paint designed for use on roads, runways, car parks, and sports facilities. Offering excellent adhesion to asphalt, bitumen, concrete, and brick, it delivers a highly durable, abrasion-resistant finish that stands up to heavy traffic and outdoor exposure.\u003c\/p\u003e\n\u003cp\u003eRoadline RL52 produces no bleeding on asphalt or bitumen surfaces and is suitable for both interior and exterior use. It can be paired with Bradite Low Slip Additive LS30 to provide additional underfoot traction where a non-slip surface is required. Available in white and yellow as standard.\u003c\/p\u003e\n\u003cp\u003eSurface dry in just 20 minutes and with a minimum overcoating time of one hour, RL52 is ideal for projects where downtime must be kept to a minimum.\u003c\/p\u003e \u003cul\u003e\n  \u003cli\u003eMinimum overcoating time of one hour - ideal for minimising downtime on busy surfaces\u003c\/li\u003e\n  \u003cli\u003eExcellent abrasion resistance for long-lasting line markings\u003c\/li\u003e\n  \u003cli\u003eWithstands heavy foot and vehicle traffic in demanding environments\u003c\/li\u003e\n  \u003cli\u003eBonds reliably to asphalt, bitumen, concrete, and brick\u003c\/li\u003e\n  \u003cli\u003eFormulated to prevent bleed-through on dark surfaces\u003c\/li\u003e\n  \u003cli\u003eMaintains sharp, clean line definition on asphalt and bitumen substrates\u003c\/li\u003e\n  \u003cli\u003eCan be used with Bradite Low Slip Additive LS30 to create a non-slip surface\u003c\/li\u003e\n  \u003cli\u003eLow odour, non-flammable formula safe for use in occupied environments\u003c\/li\u003e\n  \u003cli\u003eWater-resistant finish suitable for exterior exposure once cured\u003c\/li\u003e\n\u003c\/ul\u003e \u003ctable\u003e\n\u003ctd\u003eArea\u003c\/td\u003e\n\u003ctd\u003eInterior or exterior\u003c\/td\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended Use\u003c\/td\u003e\n\u003ctd\u003e\u003cul\u003e\n\u003cli\u003eBonds reliably to asphalt, bitumen, concrete, and brick\u003c\/li\u003e\n  \u003cli\u003eSuitable for use over sound existing coatings including polyurethane, epoxy, and chlorinated rubber\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003ctd\u003eWater Based\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoverage\u003c\/td\u003e\n\u003ctd\u003eUp to 12m² per Litre (varies with surface porosity \u0026amp; texture)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrying Time\u003c\/td\u003e\n\u003ctd\u003e\u003cul\u003e\n\u003cli\u003eSurface dry 20 minutes\u003c\/li\u003e\n\u003cli\u003eLight traffic 16 hours minimum, after final coat\u003c\/li\u003e\n\u003cli\u003eFull cure in 7 days\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRe-Coat Time\u003c\/td\u003e\n\u003ctd\u003e1 hour minimum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended Coats\u003c\/td\u003e\n\u003ctd\u003e2 full coats (on bare absorbent surfaces, apply a 20% thinned priming coat first)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication Method\u003c\/td\u003e\n\u003ctd\u003eBrush, roller or sprayer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClean Up\u003c\/td\u003e\n\u003ctd\u003eClean all equipment with clean water immediately after use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePreparation\u003c\/h2\u003e\u003cul\u003e\n  \u003cli\u003eEnsure all surfaces are completely dry, dust free, and free from contamination, grease, oil, laitance, and efflorescence before coating\u003c\/li\u003e\n  \u003cli\u003eRemove all loose and flaking paint using high pressure water cleaning back to a sound substrate\u003c\/li\u003e\n  \u003cli\u003eRemove all grease and oil using Bradite Industrial Degreaser TD39 — a second application may be required for stubborn stains\u003c\/li\u003e\n  \u003cli\u003ePower-floated, shiny, or non-porous concrete floors must be vacuum blast cleaned to a roughness profile of 30–50 microns, or acid etched using Bradite Acid Etch TA37\u003c\/li\u003e\n  \u003cli\u003eFill all cracks and pits with a suitable screed or mortar before painting\u003c\/li\u003e\n  \u003cli\u003eRoughen intact areas of existing coatings by abrasive manual or disc rubbing and feather back to a sound coating edge\u003c\/li\u003e\n  \u003cli\u003eConfirm compatibility with existing coatings by preparing and painting a test patch before full application\u003c\/li\u003e\n  \u003cli\u003eApplication and use should conform to BS 6150 and BS 5493 codes of practice\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplication\u003c\/h2\u003e\u003cul\u003e\n  \u003cli\u003eStir thoroughly before use\u003c\/li\u003e\n  \u003cli\u003eFor concrete, wood, or other absorbent substrates, thin the first coat with 5-10% water to allow penetration into the substrate\u003c\/li\u003e\n  \u003cli\u003eApply two full coats - on bare absorbent surfaces, apply a 20% thinned priming coat first before the two full coats\u003c\/li\u003e\n  \u003cli\u003eAllow a minimum of 20 minutes surface drying time and a minimum of 1 hour before overcoating\u003c\/li\u003e\n  \u003cli\u003eAllow 16 hours minimum after the final coat before permitting light traffic\u003c\/li\u003e\n  \u003cli\u003eAllow 7 days for full cure - do not subject to heavy traffic for at least 48 hours after final coat\u003c\/li\u003e\n  \u003cli\u003eDo not apply below 5°C or when the surface temperature is less than 3°C above the dew point\u003c\/li\u003e\n  \u003cli\u003eNote that drying times will be prolonged at lower temperatures and higher humidity\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eThinning Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrush \u0026amp; Roller:\u003c\/strong\u003e Supplied ready for use. Thin with up to 5% water if required\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConventional Air Spray:\u003c\/strong\u003e Thin with 5–15% water. Tip size 2.0mm, tip pressure 60psi (0.4MPa)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAirless Spray:\u003c\/strong\u003e Thin with 5–15% water. Tip size 18 thou (0.46mm), tip pressure 2100psi (15MPa)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAftercare \u0026amp; Storage\u003c\/h2\u003e\u003cul\u003e\n  \u003cli\u003eAllow a minimum of 16 hours after the final coat before permitting light foot traffic\u003c\/li\u003e\n  \u003cli\u003eDo not subject the surface to heavy traffic for at least 48 hours after the final coat\u003c\/li\u003e\n  \u003cli\u003eAllow 7 days for the coating to reach full cure before use in demanding conditions\u003c\/li\u003e\n  \u003cli\u003eNote that curing times will vary depending on film thickness, temperature, and relative humidity\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOngoing Maintenance\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eInspect line markings periodically for signs of wear, fading, or surface damage\u003c\/li\u003e\n  \u003cli\u003eFor maintenance repainting, touch up bare areas with a first coat before applying full coats over the entire surface\u003c\/li\u003e\n  \u003cli\u003eRe-prepare and degrease the surface before any repainting using Bradite Industrial Degreaser TD39\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eEquipment Care\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eClean all brushes, rollers, and spray equipment with clean water immediately after use\u003c\/li\u003e\n  \u003cli\u003eDo not allow product to dry on tools or equipment\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bradite","offers":[{"title":"White","offer_id":58361312182656,"sku":"115201WHITE","price":89.24,"currency_code":"GBP","in_stock":true},{"title":"Yellow","offer_id":58361312215424,"sku":"115201YELLO","price":89.24,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0418\/6229\/9814\/files\/ndp-bradite-roadline-rl52-white-5l.jpg?v=1782907323","url":"https:\/\/nextdaypaint.co.uk\/products\/bradite-roadline-rl52-water-based-paint-5-litre","provider":"Next Day Paint","version":"1.0","type":"link"}