{"product_id":"bradite-low-slip-additive-ls30-agrregate-250ml","title":"Bradite Low Slip Additive LS30 Agrregate - 250ml","description":"\u003ch1\u003eOverview\u003c\/h1\u003e \u003cp\u003eBradite Low Slip Additive LS30 is a hard aluminium oxide aggregate that mixes directly into Bradite floor and deck paints to create a durable, slip-resistant surface. Compatible with the full range of Bradite floor paints, it is ideal for wet, high-traffic, and hazardous floor areas both indoors and out.\u003c\/p\u003e\n\u003cp\u003eEach pre-measured 250ml pack (400g) is sized for a 5 litre tin of paint. Simply stir in thoroughly before application, the aggregate stays suspended in the paint, locking permanently into the cured film to deliver long-lasting underfoot traction.\u003c\/p\u003e\n\u003cp\u003eManufactured under ISO 9001:2015 and ISO 14001:2015 certified systems, LS30 is a straightforward, cost-effective way to improve floor safety without specialist coatings.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTough aluminium oxide particles withstand heavy foot traffic and abrasion\u003c\/li\u003e\n\u003cli\u003eDelivers long-lasting slip resistance for the full life of the coating\u003c\/li\u003e \u003cli\u003eHelps prevent accidents on wet and high-traffic floor areas\u003c\/li\u003e\n\u003cli\u003eAggregate bonds permanently into the cured paint film for lasting protection\u003c\/li\u003e\n\u003cli\u003ePre-measured 250ml \/ 400g pack - one tin per 5 litres of floor paint\u003c\/li\u003e\n\u003cli\u003eStays suspended in the paint during application for an even, consistent finish\u003c\/li\u003e\n\u003cli\u003eCompatible with all Bradite floor paints\u003c\/li\u003e\n\u003cli\u003eSuitable for interior and exterior use across a wide range of floor types\u003c\/li\u003e\n\u003c\/ul\u003e \u003ctable\u003e\n\u003ctd\u003eArea\u003c\/td\u003e\n\u003ctd\u003eInterior or exterior\u003c\/td\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended Use\u003c\/td\u003e\n\u003ctd\u003e\u003cul\u003e\n\u003cli\u003eCommercial and industrial floor areas subject to heavy foot traffic\u003c\/li\u003e\n\u003cli\u003eWet rooms, washrooms, and bathroom floors where slip hazards are present\u003c\/li\u003e\n\u003cli\u003eWarehouse and factory floors prone to spillages or moisture\u003c\/li\u003e\n\u003cli\u003eExternal decks, walkways, and ramps exposed to rain or damp conditions\u003c\/li\u003e\n\u003cli\u003eLeisure and hospitality environments such as pool surrounds, changing rooms, and kitchens\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003ctd\u003eAluminium oxide aggregate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoverage\u003c\/td\u003e\n\u003ctd\u003e250ml pack size is suitable for 5 Litre tin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended Coats\u003c\/td\u003e\n\u003ctd\u003eAs required by base paint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication Method\u003c\/td\u003e\n\u003ctd\u003eBrush, roller, or appropriate applicator as specified in the base paint's technical datasheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePreparation\u003c\/h2\u003e\u003cp\u003eEnsure the surface to be painted is clean, dry, and free from grease, dust, oil, and loose material. Refer to the technical datasheet for the specific Bradite floor paint being used for full surface preparation guidance.\u003c\/p\u003e\n\u003cp\u003eSelect the appropriate Bradite floor paint for your application and prepare it according to its individual product instructions. Confirm the substrate and conditions are suitable for application before incorporating the additive.\u003c\/p\u003e\u003ch2\u003eApplication\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eShake or stir the LS30 additive thoroughly before use to ensure even particle distribution.\u003c\/li\u003e\n\u003cli\u003eAdd the full contents of one 250ml LS30 tin (400g) directly into a 5 litre tin of Bradite floor paint.\u003c\/li\u003e\n\u003cli\u003eMix thoroughly and continuously until the aluminium oxide aggregate is evenly suspended throughout the paint.\u003c\/li\u003e\n\u003cli\u003eApply immediately after mixing, do not allow the mixture to stand unused for extended periods without re-stirring.\u003c\/li\u003e\n\u003cli\u003eApply the paint using a brush, roller, or appropriate applicator as specified in the base paint's technical datasheet.\u003c\/li\u003e\n\u003cli\u003eRe-stir the paint regularly during application to maintain an even distribution of the aggregate.\u003c\/li\u003e\n\u003cli\u003eThe end user and applicator must verify that the finished floor surface provides adequate slip resistance under all expected usage conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAftercare \u0026amp; Storage\u003c\/h2\u003e\u003cp\u003eAllow the painted surface to cure fully before allowing foot traffic or placing objects on the floor\u003c\/p\u003e\n\u003cp\u003eRefer to the technical datasheet for the specific Bradite floor paint used for full cure times\u003c\/p\u003e\n\u003ch3\u003eCleaning\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eClean regularly using a stiff brush or mop with a mild detergent and warm water\u003c\/li\u003e\n\u003cli\u003eAvoid harsh solvents, abrasive cleaners, or acid-based products as these may damage the paint film\u003c\/li\u003e\n\u003cli\u003eRinse thoroughly after cleaning to remove any detergent residue\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMaintaining Slip Resistance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInspect the floor surface periodically to ensure slip resistance remains effective\u003c\/li\u003e\n\u003cli\u003eRemove any grease, oil, or heavy soiling promptly as these can reduce underfoot traction\u003c\/li\u003e\n\u003cli\u003eDo not apply additional floor coatings or sealers over the surface without first consulting the Bradite technical datasheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDamage and Recoating\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIf the coating becomes worn or damaged, clean the area thoroughly before reapplying\u003c\/li\u003e\n\u003cli\u003eWhen recoating, add Bradite Low Slip Additive LS30 to the new paint as per the original application instructions to maintain slip resistance\u003c\/li\u003e\n\u003cli\u003eAlways ensure the finished surface continues to meet slip resistance requirements for its intended use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bradite","offers":[{"title":"Default Title","offer_id":58361312248192,"sku":"113005LOWSL","price":12.16,"currency_code":"GBP","in_stock":true}],"url":"https:\/\/nextdaypaint.co.uk\/products\/bradite-low-slip-additive-ls30-agrregate-250ml","provider":"Next Day Paint","version":"1.0","type":"link"}