{"product_id":"benjamin-moore-insl-x-high-build-peel-bonding-primer-white-1-gallon-1","title":"Benjamin Moore Insl-X High Build Peel Bonding Primer - White - 1 Gallon","description":"\u003ch1\u003eOverview\u003c\/h1\u003e \u003cp\u003eBenjamin Moore Insl-X High Build Peel Bonding Primer is a high-performance water-based acrylic primer designed to smooth, seal and extend the life of weathered surfaces suffering from peeling, cracking, or chalking paint. Ideal for use on wood, masonry and galvanised metal, this problem-solving primer creates a strong, flexible bond that glues down the old coating and prevents peeling and future failures. Applying as a milky white colour to help with visibility on application, the High Build Peel Bonding Primer can be laid on thick, up to 0.5mm wet, to fill in the surface and create a smooth, uniform finish ready for topcoating. Fast-drying, it allows for topcoat application in just 2 hours, helping you move projects along faster.\u003c\/p\u003e\u003cli\u003eHelps to seal and smooth weathered, peeling or chalking surfaces - reducing surface preparation\u003c\/li\u003e\u003cli\u003eEasy application - applies as a milky white colour to help with visibility\u003c\/li\u003e\u003cli\u003eFast drying – ready for topcoat in just 2 Hours\u003c\/li\u003e \u003cli\u003eWorks a wide range of surfaces, both indoors and outdoors\u003c\/li\u003e\u003cli\u003eMildew-resistant\u003c\/li\u003e\u003cli\u003eEffectively blocks stains from rust as well as mild tannin bleed\u003c\/li\u003e\u003cli\u003eLow-VOC water-based formula\u003c\/li\u003e\u003cli\u003eEasy cleanup with soap and water\u003c\/li\u003e\u003cli\u003e1 Gallon covers between 14 to 33m2 - depending on surface and application\u003c\/li\u003e \u003ctable\u003e\n\u003ctd\u003eArea\u003c\/td\u003e\n\u003ctd\u003eInterior \u0026amp; Exterior\u003c\/td\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended Use\u003c\/td\u003e\n\u003ctd\u003eUse on interior and exterior surfaces, including drywall, plywood, wood siding, fences, stucco, concrete, and galvanised metal in residential and commercial applications. \n\n\u003cp\u003eNot for use on floors, decks or other walking surfaces - Not for immersion service or areas of pooling water \u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003ctd\u003eWater-Based\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoverage\u003c\/td\u003e\n\u003ctd\u003eUp to 9m2 per litre\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrying Time\u003c\/td\u003e\n\u003ctd\u003eTouch Dry: 1 Hour\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRe-Coat Time\u003c\/td\u003e\n\u003ctd\u003e2 Hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended Coats\u003c\/td\u003e\n\u003ctd\u003e1-2 Coats\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication Method\u003c\/td\u003e\n\u003ctd\u003eBrush, Roller or Sprayer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVOC Levels\u003c\/td\u003e\n\u003ctd\u003eLow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClean Up\u003c\/td\u003e\n\u003ctd\u003eRemove as much product as possible from the equipment before cleaning with water\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePreparation\u003c\/h2\u003e\u003cp\u003eAll surface areas to be painted should be clean, dry, sound and free of all dirt, grease, oils, waxes, mildew and any other surface contaminants that can cause paint failure. \u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eDirt and chalk should be thoroughly removed by scrubbing with warm soapy water. \u003c\/li\u003e\n\u003cli\u003eGrease residue should be removed with a cleaner. \u003c\/li\u003e\n\u003cli\u003ePeel Bonding Primer PB-1100 works great over marginally prepared surfaces, however removing as much loose or peeling paint as practical will increase the longevity of the finish. For best results, remove loose, cracking and peeling paint from previously coated surfaces. \u003c\/li\u003e\n\u003cli\u003eRemove loose rust, mill scale, rust as well as dull glossy surfaces by lightly sanding. \u003c\/li\u003e\n\u003cli\u003eRemove sanding dust before application. \u003c\/li\u003e\n\u003cli\u003eRepair\/replace any seriously damaged and\/or delaminated surface areas. \u003c\/li\u003e\n\u003cli\u003eLightly feather sand all rough paint edges to adjacent surface area. \u003c\/li\u003e\n\u003cli\u003eAll glossy surface areas should be lightly sanded to effectively dull any existing sheen and create a more suitable surface for painting. \u003c\/li\u003e\n\u003cli\u003eMildew – Surface areas affected by mildew should be thoroughly hand scrubbed with a soft to medium bristle scrub brush and a solution of one cup Tri-Sodium Phosphate or a nonammoniated detergent cleaner mixed with one part household bleach* and three parts warm water, per gallon solution. Allow solution to stand on the affected surface areas for approximately 10 – 20 minutes, then rinse thoroughly with clean water and allow 24 hours to dry. *Follow bleach manufacturer’s instructions for safe handling and use of bleach solution. \u003c\/li\u003e\n\u003cli\u003eStains – As a stain blocker, High Build Peel Bonding Primer will block rust stains and mild tannin stains. Two coats maybe required to seal difficult staining on tannin-rich wood. \u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplication\u003c\/h2\u003e\u003cp\u003eAlways test a small area of the surface to be painted to ensure you are happy with the finished results\u003c\/p\u003e\n\u003cp\u003eHigh Build Peel Bonding Primer applies easily with a quality brush, roller, airless or conventional spray methods. \n\n\u003c\/p\u003e\u003cp\u003eFor best results, it is recommended to apply by brush or roller application to effectively work primer into surface pores. \u003c\/p\u003e\n\u003cp\u003eIf applying by airless sprayer, it is recommended to use a unit with a minimum of 2,000 PSI of pressure with a 0.018 – 0.022 fluid spray tip. When applying by airless sprayer, it is recommended that the surface area should be back-rolled\/brushed to insure proper adhesion, even application and effectively work primer into surface pores. \u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eStir product thoroughly before using. \u003c\/li\u003e\n\u003cli\u003eIt is important to maintain a wet edge during all methods of paint application by brushing or rolling into previously applied coating area.\u003c\/li\u003e \n\u003cli\u003eFor a high-build application, apply at a spread rate of 80 sq. ft. per gallon, at 20 mils (wet film thickness). \u003c\/li\u003e\n\u003cli\u003eApply when surface and ambient temperature are above 35 °F and below 90 °F. Avoid paint application outside when weather conditions are threatening, and late in the afternoon when there is a threat of moisture condensing on wet primer. Do not prime if surface temperature is within 5 °F of the dew point. \u003c\/li\u003e\n\u003cli\u003eIt is recommended to topcoat with a water-based\npaint. \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eAlways follow manufacturer's instructions found on the tin\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eAftercare \u0026amp; Storage\u003c\/h2\u003eProtect from freezing","brand":"Benjamin Moore","offers":[{"title":"Default Title","offer_id":58775918870912,"sku":"BP110009U-01","price":72.31,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0418\/6229\/9814\/files\/ndp-benjamin-moore-peel-bonding-primer-white-1_20gallon_d7b69e39-b904-48ee-9a0a-4b48e3ccd464.jpg?v=1787679555","url":"https:\/\/nextdaypaint.co.uk\/products\/benjamin-moore-insl-x-high-build-peel-bonding-primer-white-1-gallon-1","provider":"Next Day Paint","version":"1.0","type":"link"}