Sikkens Cetol HLS Plus Woodstain

SKU: Sikkens5085924
Sikkens Cetol HLS Plus Woodstain
Sikkens Cetol HLS Plus Woodstain
Sikkens Cetol HLS Plus Woodstain
Sikkens Cetol HLS Plus Woodstain
Sikkens Cetol HLS Plus Woodstain
Sikkens Cetol HLS Plus Woodstain
Sikkens Cetol HLS Plus Woodstain
Sikkens Cetol HLS Plus Woodstain
Sikkens Cetol HLS Plus Woodstain
Sikkens Cetol HLS Plus Woodstain
Sikkens Cetol HLS Plus Woodstain
Sikkens Cetol HLS Plus Woodstain
Sikkens Cetol HLS Plus Woodstain
Sikkens Cetol HLS Plus Woodstain
Sikkens Cetol HLS Plus Woodstain
Sikkens Cetol HLS Plus Woodstain
Sikkens Cetol HLS Plus Woodstain
Sikkens Cetol HLS Plus Woodstain
Sikkens Cetol HLS Plus Woodstain
Sikkens Cetol HLS Plus Woodstain
Sikkens Cetol HLS Plus Woodstain

Sikkens Cetol HLS Plus Woodstain

SKU: Sikkens5085924
Regular price £17.70
/
VAT included.
Only 46 items in stock!
  • ORDER BEFORE 2PM FOR SAME DAY DISPATCH
  • Due to courier issues next day delivery cannot be guaranteed

Overview

Sikkens Cetol HLS Plus is a highly translucent, solvent borne, semi-gloss woodstain for use on exterior softwood and hardwood substrates. It’s a low build formula that absorbs into the wood allowing the natural grain and quality of wood to show through. It can be used as a 3 coat system on cladding, fascias, soffits, rough sawn timber, fencing, decking, garden furniture and handrails. As well as a base stain on bare smooth joiner prior to the use of higher build finishes such as Cetol Filter 7 or Cetol THB Plus.


• Resistance to UV Radiation, peeling and cracking

• Microporous and water-repellent

• Can be used as a base stain and a finishing coa

Area Exterior
Recommended Use Exterior softwood and hardwood
Base Solvent based
Coverage 7-14m2per litre
Drying Time 4-6 hours
Re-Coat Time 18 - 24 hours
Recommended Coats 1-3 Coats
VOC Levels High

Preparation

Always ensure the surface to be treated is clean, dry and free from any dust, algae, fungi or moss.


• Resinous deposits should be removed with a scraper

• Degrease the surface with a lint free cloth and suitable solvent, allow to evaporate fully before applying Sikkens

• For previously stained or weathered wood use a fine sandpaper of 120 or 240 grit to abrade the surface working in the direction of the grain

• Dust down entire surface

• Fill any cracks, holes or chips, always use a filler designed for timber

• Please always follow instructions of manufacturer when staining new wood as some substrates will require leaching time


Application

Before applying stir the product thoroughly and test a small area to ensure colour and adhesion. Colours can vary dependant on surface to be treated.


• Do not apply when there is the risk of rain or when temperatures are below 5°C or above 30°C

• Protect from frost and rain until dry

• Always ensure product is fully mixed before and during application to ensure consistency in colour

• Do not thin

• For application use a good quality, long-haired, soft bristle brush

• Apply along the grain in even strokes and avoid over brushing

• Pay special attention to areas of exposed grain, tops and bottoms of doors and undersides of cills

• Excess surface liquid should re-distributed after 5-20 minutes using a dry brush

• Allow a minimum of 18-24 hours drying time

• To apply a 3 coat system, lightly sand between each coat with a 240 grit or lighter sandpaper, do not break the surface coating

• Remove all dust before re-applying

• To use as a base coat, after applying one coat continue with a top coat such as Cetol Filter 7

• Subsequent coatings should be applied as soon as possible after the previous coat has dried, but no sooner than 12-24 hours, in order to provide full protection

• Additional preparation may be required if over 3 months between coats


Note: Note: Always follow the manufacturer instructions found on the tin.


Aftercare & Storage

Store in cool, dry, frost-free conditions

Delivery

All orders placed on a working day before 1pm will be dispatched on the same day for next working day delivery. Orders placed before 2pm on Friday will be delivered on Monday (excluding bank holidays). Orders placed on weekends and Bank Holidays will be dispatched on the next working day.

Delivery Charges 

Express

UPS

Next Working Day

£3.95

 

Exceptions

Certain postcodes delivery times and charges may vary please see our list below of effected postcodes. Please contact us prior to ordering, alternatively please ensure your number is on your order and we will contact you to discuss the best delivery method and charges.

AB37 - AB38

IV40 - IV56

PA42 - PA49

AB44 - AB45

IV7

PA60

AB53 - AB56

IV9 - IV12

PA61 - PA78

CA18 - CA27

KA27 - KA28

PA80 - PA88

HS1 - HS9

KW (All postcodes)

PH17 - PH26

Isle of Man (All IM postcodes)

LA15 - LA23

PH30 - PH44

IV14 - IV29

PA20

PH49 - PH50

IV30 - IV32

PA21 - PA38

TR21 - TR25

IV36

PA41

GY1 - GY10

ZE (All postcodes)

GY1 - GY10

JE1 - JE5

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.